Publicidad
Idiomas disponibles
Idiomas disponibles
If the trigger switch is pulled while the lock-off button
is pressed in the direction of either of the arrow
marks, the main switch can be turned ON.
After the switch is on, the saw blade will continue to
operate as long as you pull on the trigger switch, even
if you release the lock-off button.
Lock-off button
6. Check for proper operation of the brake
For further details, refer to the item of [4. Check for
proper operation of the brake] on page 20.
7. About the mode select function
Each time the mode selector switch is pushed, the
operation mode changes.
When the High Torque mode is selected, the mode
selector lamp lights up.
The High Torque mode reduces maximum motor
RPM enabling efficient work.
If the load increases while the motor is operating in
the Auto Switch mode, it automatically changes to the
High Torque mode.
Additionally, if the load decreases again, it
automatically returns to the Auto Switch mode.
In the High Torque mode, it does not change to the
Auto Switch mode even when the load decreases.
Mode
Auto Switch
High Torque
CAUTION
Do not give a strong shock to the switch panel or
break it. It may lead to a trouble.
NOTE
○ The mode will only change after a battery is installed
and the switch is pulled once.
Trigger switch
Fig. 23
No-load speed
6,000 /min
4,500 /min
○ The current mode will be maintained even if the
switch is on/off, or the battery is removed/reinserted.
○ When using AC/DC Adapter if the switch is repeatedly
switched ON and OFF during a short period of time
while in the Auto Switch mode, the tool will be
stopped early by the overheat protection feature.
When that happens, using the High Torque mode is
recommended.
8. Remaining battery indicator
You can check the battery's remaining capacity by
pressing the remaining battery indicator switch to light
the indicator lamp. (Table 5)
It is best to use the remaining battery indicator as a
guide since there are slight differences such as
ambient temperature and the condition of the battery.
Also, the remaining battery indicator may vary from
those equipped to a tool or charger.
Remaining battery
indicator lamp
Display panel
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than
25%.
Blinks ;
The battery remaining power is nearly
empty. Recharge the battery soonest
possible.
English
Remaining battery
indicator switch
Fig. 24
Table 5
23
Publicidad
