Metz mecablitz 26 AF-1 digital Manual De Instrucciones página 95

5.4.5 26AF-1 Samsung
The flash unit supports the wireless Samsung remote
system in slave flash mode group A and all remote
channels 1, 2, 3 and 4 (set on the camera if possible).
5.4.6 26AF-1 Sony
The flash unit supports the wireless Sony remote system
+
(CTRL and CTRL ) in slave flash mode (set on the
camera if possible).
Wireless remote control of one or more slave flash units
by one master or controller flash unit on the camera
(for example, mecablitz 64 AF-1 digital Sony) or by the
camera master (depending on the camera type) is thus
possible.
For slave flash unit 26AF-1, all remote channels 1, 2, 3
and 4 are always set.
Applicable to all versions:
The slave flash units must be able to receive the light
from the master or controller flash unit with the
integrated slave sensors
group and the remote channel on the camera, the
master or the controller flash unit.
for the remote mode. Set the
Depending on the camera model, the camera's internal
flash unit can also function as a master or controller
flash unit. Please consult the respective camera opera-
ting instructions for further tips on setting the master or
controller flash unit.
Remote slave flash mode settings
• Switch on the flash unit with the
• Press the "SLAVE" button
the Remote-Slave mode of operation. The setting is
immediately effective and automatically saved.
Testing remote flash mode
• Place the slave flash units in the desired positions for
the shot. Use flash unit mounting foot S60 (optional
accessories) to set up the slave flash unit.
• Wait for the flash readiness of all connected flash
units. Once the slave flash units have achieved flash
readiness, the "STATUS" LED
• Press the manual firing button on the master or
controller flash unit to fire a test flash. The slave flash
units respond with a test flash, if supported by the
camera.
button.
on the flash unit to set
lights up in green.
95
k