Hilti Nuron SI-AT-22 Manual De Instrucciones página 43

Conditions: South Korea
Country-specific approval information
제품명: 아답티브 임펙 모듈
수입자(상호명): 힐티코리아㈜
제조회사: Hilti Corporation
제조국: 스위스
A/S: 080-220-2000
13 Hilti Li-ion batteries
Instructions for safety and use
This documentation uses the term battery to describe rechargeable Hilti Li-ion battery packs containing
several Li-ion cells joined together. These batteries are to be used in Hilti power tools exclusively. Use only
genuine Hilti batteries!
Description
Hilti batteries have cell-management and cell-protection systems.
The batteries are composed of cells that contain lithium-ion storage materials capable of providing high
specific energy density. Li-ion cells have a minimal memory effect, but they are very susceptible to external
impact, deep discharge, and high temperatures.
The products approved for use with Hilti batteries can be found in your Hilti Store or at: www.hilti.group
Safety
▶ Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶ Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶ Do not under any circumstances modify or tamper with batteries!
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Follow the instructions in the
section headed What to do in case of a battery fire.
What to do in case of damaged batteries
▶ Always contact Hilti when a battery is damaged.
▶ Never use a battery that is leaking fluid.
▶ Avoid direct eye and/or skin contact with fluid leaking from a battery. Always wear protective gloves and
eye protection when undertaking tasks involving battery fluid.
▶ Use a chemical spill cleanup kit to remove leaked battery fluid. Comply with the locally applicable cleanup
regulations for battery fluid.
▶ To store a damaged battery, place the battery in a non-flammable container and cover the battery with
dry sand, chalk powder (CaCO3) or silicate (Vermiculite). Then seal the lid air-tight and store the container
away from flammable gases, liquids or objects.
▶ Dispose of the container at your Hilti Store, or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions. Comply with the locally applicable regulations
for transporting damaged batteries!
*2343813*
2343813 English 39