Hilti Nuron SI-AT-22 Manual De Instrucciones página 27

Direct current (DC)
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Adaptive torque module
Generation
Serial no.
2 Safety
2.1 Safety precautions
▶ Observe the safety precautions in the operating instructions for the impact wrench.
3 Description
3.1 Product overview
3.2 Intended use
The product described in an electronic module for controlled tightening of fasteners so as to ensure the
quality of the connection. It can be used only with Hilti impact wrenches that have the AT­22 suffix in
the model designation. A record of the work carried out is saved in the module and can be read out, for
documentation purposes, using the AT Documentation Software PC application.
It is not possible to set a particular torque manually on this module!
Use only the impact-wrench sockets described in the operating instructions of the relevant product to tighten
Hilti fasteners.
For this product, use only the Hilti Nuron lithium-ion batteries of the B 22 series recommended in the
operating instructions of the impact wrench.
3.3 Possible misuse
Do not work with this product on electrically live lines.
*2343813*
1
2343813
SI­AT­22
02
Display
@
Indicator LEDs
;
Lock button
=
Left arrow button
%
Right arrow button
&
OK button
(
Scan button
)
Scanner
+
USB interface cover (shown open in the illus-
§
tration)
USB interface type C
/
Release button
:
English 23