Hilti Nuron SI-AT-22 Manual De Instrucciones página 31

The impact wrench to which the torque module is connected can be used only when the torque module is
locked. This protects the user against accidental changes of the settings.
Unlocking the module
The torque module has to be unlocked before changes can be made to the settings.
▶ To unlock the torque module, press the lockbutton
▶ In the display a selection frame appears around the last previously shown type of fastener and the
last previously shown operating mode.
▶ The torque module is unlocked and in setting mode. The impact wrench is deactivated.
Navigation
When the selection frame and two or more elements (options, parameters) are visible in the display, you can
move the selection frame by pressing the arrow buttons
Selecting options / changing parameters
▶ Position the selection frame on the element (option / parameter) you want to change.
▶ Press the OK button.
▶ A black background appears behind the element.
▶ Use the arrow buttons to select the setting you want.
▶ Press the OK button to accept the setting.
▶ The element reappears surrounded by the selection frame.
Locking the module
When you have made all your changes you have to relock the torque module.
▶ Press the lock button
▶ The selection frame disappears. The adaptive torque module is locked, the parameter settings have
been saved and cannot be changed accidentally.
▶ The impact wrench is re-activated.
6.3 Basic settings
6.3.1 Calling up basic settings
1. If applicable, unlock the torque module. → page 26
2. Press the OK button and hold it down for at least 1 second.
▶ The "Basic settings" menu appears on the display.
6.3.2 Selecting function in "Basic settings" menu
1. Use the arrow buttons to move the selection frame to the symbol for the desired function.
Functions in the "Basic settings" menu
Symbol Function
Show the date and time set in the torque module's clock
The AT Documentation Software has to be used to set the clock.
Show maintenance information of the impact wrench
Show percentage memory usage in the torque module
Important: When the reading for memory usage reaches 100 %, the oldest data will
automatically be overwritten.
You can use the AT Documentation Software to export the logged data and/or clear the
torque module's memory.
Hilti recommends exporting the data and saving the exported data at regular intervals.
Show the versions of the software installed on the torque module and the connected
impact wrench
Exiting "Basic settings" menu
2. Press the OK button.
6.3.3 Display icons for the "Maintenance information of the impact wrench" function
After activation of the
shown with the following display icons.
*2343813*
.
symbol, the remaining period of use of the impact wrench until the next service is
2343813
and hold it down for at least 1 second.
and .
English 27