Publicidad
Idiomas disponibles
Idiomas disponibles
Option B - Telescopic duct cover
The duct bracket should be installed against the back wall and flush with the ceiling. This bracket will hold the duct
cover in place at the top
(this a extra accessory available not included with the hood).
.
Secure the bracket to the wall:
•
Align the marked centerline on the bracket with the centerline on the wall.
•
Mark 2 screw hole locations in the wall.
•
Drill 5/16" pilot holes in the marked locations.
•
Install wall fastener anchors.
•
Drive wood screws, by hand, into the fastener to allow anchors to expand. Remove the screws.
•
Secure the bracket to the wall with wood screws and/or fasteners.
� � � � �
� �
����
1
Publicidad
