Publicidad
Idiomas disponibles
Idiomas disponibles
EN
64
OPERATION
Getting Started
1
Touch the On/Off button
on the hob control
panel. After switching
on, the unit beeps once
and "-" is displayed on
all screens. The device is
now in standby mode.
Select the desired heating setting.
1.
Press fan icon to start exhaust fan. Press the bar to select a speed level. From
0 to 7 speeds and to Booster speed. Press to Plus speed, fan speed display will
show "P", it is even higher speed than booster. Whatever working aat B or P
speed, the exhaust fan will come back to speed 7 after mintures.
2.
In Standby condition, long press the fan icon.
For 5 seconds, hob and hood will work together, there will be "." on the
display beside the fan speed. During this coneition, any change of hob power
will also change fan speed. Long press same icon for 5 seconds again, will quit
connection.
•
If no heat level setting is selected within one minute, the device will turn off
automatically. In this case, start again at step 1.
•
You can adjust the heat setting at any time during the cooking process.
•
Pressing one of the corresponding buttons either increases or decreases the
power.
2
Place suitable cookware
on the hob that you
want to use.
Make sure that the hob
and the underside of
the cookware are clean
and dry.
4
3
When you touch the
heating field selector, an
indicator light will flash
next to the button.
Select the desired
cooking zone.
Publicidad
