Klarstein CHEF-FUSION Manual página 75

Problem Possible cause
The unit emits The fan built into the unit has
fan sounds. switched on to prevent the
electronics from overheating.
It may happen that the fan
continues to run for some time
after you have switched off
the unit.
The pots do 1. The appliance cannot
not heat up. detect the pot because
it is not suitable for
induction.
2. The appliance cannot
detect the pot because
the pot is either too small
for the hob or is not in
the centre of the hob.
Technical error.
The appliance
or hob has
unexpectedly
switched itself
off, a sound is
heard and an
error code is
displayed.
Potential solution
This is normal and does not
require any action. Do not
disconnect the device from the
power supply while the device's
fan is still running.
Place the pot in the centre of
the hob and make sure that
the dimensions of the bottom
are suitable for the hob.
Please write down the error
code, unplug the device and
contact customer service.
EN
75