Pause
If you press the
button while using the unit, it can be paused. If you want to
continue use, press the button again.
Timer
The timer can be used in two different ways:
•
The timer can be set so that only one hob is switched off after the time has
elapsed.
•
A time between "00" and "99" minutes can be set on the timer.
Once the timer is set, the countdown will begin. The time remaining until the
countdown is displayed on the screen and the timer symbol flashes every 5
minutes. The unit beeps for 30 seconds and the timer display shows "-" when the
countdown is over.
Automatically switch off a single hob
1
In hob selection, touch
the hob for which you
want to activate the
timer (e.g. 30 minutes).
Touch the timer symbol. The display flashes in two
places. First select "3" and then press the timer
symbol again. The display then flashes in one place.
Select "0" and finish this step. The timer display
will start flashing and "30" will be displayed on the
screen. Adjust the time by sliding your finger across
the slider.
2
EN
67