cecotec BOLERO HEXA P506000 EDGE A+ Manual De Instrucciones página 56

ENGLISH
- Check that the electrical capacity of the installation and the sockets can withstand the
maximum power of the appliance. If in doubt, contact a qualified technician.
- If the socket and plug of the appliance are not compatible, ask a qualified technician to
replace the socket with a suitable model. The latter, in particular, will also have to ensure
that the cross-section of the socket cables is adequate for the power used by the appliance.
The use of adapters, multiple sockets and/or extensions is not recommended. If their use
cannot be avoided, remember to use only single or multiple adapters and extension cords
that comply with current safety regulations. In these cases, never exceed the maximum
current capacity indicated on the single adapter or extension cord and the maximum
power indicated on the multiple adapter. The plug and socket shall be easily accessible
4. OPERATION
Setting the time
The first time the oven is switched on, the control panel display will light up briefly and show
"12:00". The oven time can only be set in standby mode.
1. The first time the oven is switched on, the display will show "12:00".
2. Press the clock/time icon
3. Use the up/down icons to set the time.
4. Press the clock/time icon
Control panel
Fig. 5 key:
Icon
1. Cooking mode
2. Quick
preheating/Child
safety lock
3. On/off
4. Quick cooking
5. Display
56
Bolero Hexa P506000 Edge A+
Bolero Hexa P506000 Matt A+
, "12:00" will flash on the display.
again to confirm the settings.
Description
Press this icon repeatedly to choose between the different functions
of the oven. There are 13 different functions.
Press and hold the corresponding icon to lock the control panel.
Press and hold again to unlock the control panel.
The quick preheating function allows the oven to preheat in a short
time.
It is used to switch the oven on and off.
Press the icon of the desired function directly to access it
immediately.
It shows the current oven settings.