cecotec BOLERO HEXA P506000 EDGE A+ Manual De Instrucciones página 72

ENGLISH
Note: cooking times are approximate and may vary according to personal taste. When cooking
with the grill or grill & fan, the grease-collection tray must always be placed on the bottom
oven guide.
7. CLEANING AND MAINTENANCE
Cleaning the door
In the case of normal use of the oven, it is not necessary to disassemble the door, but if it
is necessary to disassemble it, e.g., for cleaning, follow these instructions. The oven door is
heavy, so be careful when handling it.
Disassembling the oven door
Fig. 6.
1. Fully open the door.
2. Fully open the left and right hinge lever.
3. Hold the door as shown in the third picture in figure 6.
4. Gently close the door until the left and right hinge levers are engaged in part B of the door.
5. Remove the hinge hooks from their location following the arrow shown in Figure 6.
6. Rest the door on a soft surface.
NOTE:
To replace the door, repeat the above steps in reverse order.
Removing the inner glass
Fig. 7
1. Fold down the oven door and remove the gasket by unscrewing the screws.
2. Carefully remove the inner glass.
3. Clean the glass with a suitable cleaner. Dry it thoroughly and place it on a soft surface.
4. Then you can also clean the inside of the outer glass.
8. TECHNICAL SPECIFICATIONS
Product reference: 02818/02819
Product: Bolero Hexa P506000 Edge A+ / Bolero Hexa P506000 Matt A+
Voltage: 220-240V~
Rated frequency: 50 – 60 HZ
Rated power: 2900-3400W
72
Bolero Hexa P506000 Edge A+
Bolero Hexa P506000 Matt A+