Oerlikon CITOSTEEL 255C Manual De Instrucciones página 21

Status bar
Figure 9.
A) Information about active welding mode
B) 2/4 step
C) USB Interface
Welding Parameters Bar
The Welding Parameters Bar enables:

Welding Program change.

Wave Control Value change.

The gun's trigger
FCAW, SMAW).

Add or hide functions and welding parameters –
User Setup

Change the Setup
Table 7. GMAW and FCAW Welding Parameters Bar
Symbol
Welding Process Choice
Support
The function of the gun's trigger change
Pinch
Configuration Menu (Setup)
User Setup
WARNING
The availability parameters depend on the selected
welding program / welding process.
Table 8. SMAW Welding Parameters Bar
Symbol
Welding Process Choice
Support
Arc Force
Hot Start
Configuration Menu (Setup)
User Setup
English
function change (GMAW,
Description
Description
Welding Program Choice
To select the Welding Program:

Press the Button [37] or Right Knob [36] to get
access of Welding Parameters Bar.

Use the Right Knob [36] to highlight the icon
"Welding Process Choice".

Press the Right Knob [36] to confirm the selection.

Use the Right Knob [36] to highlight the icon "Select
welding program".

Press the Right Knob [36] to confirm the selection.

Use the Right Knob [36] to highlight the program
number.

Press the Right Knob [36] to confirm the selection.
The Lists of available programs depends on the power
source.
17
Figure 10.
Figure 11.
Figure 12.
WARNING
English