Oerlikon CITOSTEEL 255C Manual De Instrucciones página 30

Lock function – it allows to lock/unlock some
functions on
To lock functions:

Access to the Settings and Configuration Menu.

Use the Right Knob [36] to highlight the Lock
functions icon.
Figure 45.

Press the Right Knob [36]. The Lock Function menu
is shown on the display.

Use the Right Knob [36] to highlight the function (for
example "Advanced setup").
Figure 46.

Press the Right Knob [36]. The icon of chosen
parameter will disappear from the lower part of the
display (Figure 47). Also this parameter disappear
from the Welding parameters bar [44].
Figure 47.
Note: To unlock function user have to do the same
steps as steps to lock function.
English
welding parameters bar.
Enable/ Disable Jobs – it allows to switch
off/on jobs to function Save Memory.
To enable/ disable jobs:

Access to the Settings and Configuration Menu.

Use the Right Knob [36] to highlight the icon:

Press the Right Knob [36] to confirm. The
Enable/Disable Jobs menu is shown on the display.

Use the Right Knob [36] to highlight the job number.
The icon of chosen job will disappear from the lower
part of the display.
26
Figure 48.
Figure 49.
Figure 50.
English