Stihl TS 500i Manual De Instrucciones página 52

English
Specifications
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
STIHL Injection
Control unit with characteristic-curve-
driven ignition timing adjustment
Load dependent, characteristic-curve-
driven fuel injection
50
Electronic water control
The electronic water control makes it
possible to feed the optimum amount of
water to the abrasive cutting wheel. No
water is fed to the abrasive cutting wheel
during idling.
Engine
STIHL single cylinder two-stroke engine
TS 480i
Displacement: 4.41 cu in
(72.2 cm
Cylinder bore: 2.05 in (52 mm)
Piston stroke: 1.34 in (34 mm)
Engine power accord- 5.2 hp (3.9 kW)
ing to ISO 7293: at 9300 rpm
Idling speed: 2500 rpm
Max. spindle speed: 5350 rpm
TS 500i
Displacement: 4.41 cu in
(72.2 cm
Cylinder bore: 2.05 in (52 mm)
Piston stroke: 1.34 in (34 mm)
Engine power accord- 5.2 hp (3.9 kW)
ing to ISO 7293: at 9300 rpm
Idling speed: 2500 rpm
Max. spindle speed: 5350 rpm
Spark plug, fuel tank capacity
Spark plug
(suppressed): Bosch WSR 6 F
Electrode gap:
Fuel tank capacity:
Air filter
Main filter (paper filter) and flocked wire
mesh auxiliary filter
Weight
Without fuel, without abrasive cutting
wheel, with electronic water control
TS 480i:
3
)
TS 500i:
Abrasive cutting wheels
The quoted maximum permissible
operating speed of the abrasive cutting
wheel must be greater than or equal to
the maximum spindle speed of the cut-
3 off machine used.
)
Abrasive cutting wheels (TS 480i)
Outside diameter:
Max. thickness:
Bore diameter/spindle
diameter:
Tightening torque:
NGK BPMR 7 A
0.02 in (0.5 mm)
24.5 oz (0.725 l)
22.0 lbs
(10.0 kg)
22.5 lbs
(10.2 kg)
12 in.
(300 mm)
0.189 in.
(4.8 mm)
0.787 in.
(20 mm)
22 lbf ft
(30 Nm)
TS 480i, TS 500i