Descargar Imprimir esta página

Titan POWRLINER PL 3500 72V Instrucciones De Uso página 17

Equipo de alta presión para pulverizar

Publicidad

Idiomas disponibles

Idiomas disponibles

PL3500 72V
5.5
CLEANING THE HIGH-PRESSURE FILTER
Clean the filter cartridge regularly.
i
A soiled or clogged high-pressure filter can cause
a poor spray pattern or a clogged tip.
1. Follow the "Pressure Relief Procedure" found in the
Operation section of this manual, section 4.5.
2. Unscrew the filter housing (Fig. 11, Item 1) with an
adjustable wrench.
3. Pull the filter cartridge (2) from the filter support (3).
4. Clean all the parts with the corresponding cleaning agent.
If necessary, replace the filter cartridge.
5. Check the O-ring (4), replace it if necessary.
6. Place the filter insert (5) against the filter support (3). Slide
the filter cartridge (2) over the bearing spring.
7. Screw in filter housing (1) and tighten it as far as possible
with the strap wrench.
6
4
3
1
The pulsation dampener (6) carries a lifetime
warranty.
The pulsation dampener contains nitrogen gas
Attention
and should never be opened. Tampering with
the pulsation dampener (i.e. removing the four
bolts on the dampener face) will void the lifetime
warranty.
Contact Titan Technical Service at 1-800-526-
5362 if you believe the pulsation dampener
requires service.
5.6
CLEANING AIRLESS SPRAY GUN
i
1. Rinse airless spray gun with an appropriate cleaning agent.
2. Clean tip thoroughly with appropriate cleaning agent so
that no coating material residue remains.
3. Thoroughly clean the outside of the airless spray gun.
INTAKE FILTER IN AIRLESS SPRAY GUN (FIG. 12)
1. Unclip the top of the trigger guard (1) from the gun head.
2. Using the bottom of the trigger guard as a wrench, loosen
and remove the handle assembly (2) from the gun head.
3. Pull the old filter (3) out of the gun head. Clean or replace.
4. Slide the new filter, tapered end first, into the gun head.
5. Thread the handle assembly into the gun head. Tighten
with the trigger wrench.
6. Snap the trigger guard back onto the gun head.
5
2
Clean the spray gun after each use.
1
CLEANUP
3
2
17

Publicidad

loading

Este manual también es adecuado para:

24457302445730b2445730b2