Publicidad
Idiomas disponibles
Idiomas disponibles
Hot surface indicator
• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• Glows until the unit is cooled to approximately 150 °F.
Cooking areas
• The cooking areas on your range are identified by permanent circles on the
glass cooking surface. For the most efficient cooking, fit the pan size to the
element size.
• Pans should not extend more than ½" to 1" beyond the cooking area.
• When a control is turned on, you can see a glow through the glass cooking
surface. The element will cycle on and off to maintain the preset heat setting,
even at high settings.
• For more information on selecting proper types of cookware, refer to the
section Using the proper cookware on page 27.
How to set the appliance for surface cooking
CAUTION
• The surface elements may be hot even when off and burns can occur. Do not
touch the surface elements until they have cooled down sufficiently.
• At high or medium-high settings, never leave food unattended. Boilovers cause
smoking and greasy spillovers may catch on fire.
• Be sure you turn the control knob to OFF when you finish cooking.
• The intended safety functions will not work properly if you randomly fix the
knob button of the Safety knob.
Surface unit control knob
3
1
2
Knob button
Knob button
3
Single surface unit
Dual surface unit
• (A) : Large burner setting
• (B) : Middle burner setting
• (C) : Small burner setting
Make sure all surface burners are properly
installed. To light a burner:
1. Pinch or Side-push the knob button.
2. Push the knob in.
3. Turn in either direction to the setting you
want.
3
3
Triple surface unit
English 25
Publicidad
