Operating the oven
Sounds
Turn sound (beeps) On/Off.
1. Tap
, and select Sounds using the dial knob.
2. Turn the dial knob to select On/Off.
3. Push the dial knob to save the changes.
Screen Saver
Set the Screen Saver On/Off.
1. Tap
, and select Screen Saver using the dial knob.
2. Turn the dial knob to select On/Off.
3. Push the dial knob to save the changes.
Use 24-hr format
Set the clock to display the time in the 12-hour or 24-hour format.
1. Tap
, and select Use 24-hr format using the dial knob.
2. Turn the dial knob to select 12hr or 24hr.
3. Push the dial knob to save the changes.
Language
Select a preferred language from English, French, or Spanish. You can not change
the language during cooking.
1. Tap
.
2. Select the Language using the dial knob.
3. Turn the dial knob to select the Language and push to save the changes.
52 English
Wi-Fi
If you set the Wi-Fi mode to Off, mobile devices cannot connect to the range.
1. Tap
.
2. Select Wi-Fi mode using the dial knob.
3. Turn the dial knob to select On/Off and push to save the changes.
NOTE
• Pressing
will delete
from the display and prevent most of the remote
functions from operating.
• When oven cooking is finished or cancelled,
• For safety reasons, you must specify the cooking time to enable remote control.
• The oven continues operating even if the Wi-Fi connection is lost.
• Smart Control will not work properly if the Wi-Fi Connection is unstable.
• See the SmartThings app manual for detailed information.
Restart
You can restart your range.
1. Tap
.
2. Select Restart using the dial knob.
3. Turn the dial knob to select Cancel/Reset.
Factory Reset
You can reset your oven setting.
1. Tap
.
2. Select Factory Reset using the dial knob.
3. Turn the dial knob to select Cancel/Reset.
CAUTION
Before reset the oven settings, turn off all oven and cooktop functions.
Demo mode
This is used by retailers for display purposes only. In this mode, the heating
element does not operate.
1. Tap and hold
for 3 sec.
2. Set time to 12:34.
3. Tap and hold both
and
for 3 sec. Demo indicator will appear on display.
is removed from the display.