Publicidad
Idiomas disponibles
Idiomas disponibles
15 SAFETY
This section contains information and important notes on safe start-up and handling of the
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as personal injury and damage to property. In
addition, observe the symbols and pictograms used on the machine as well as the
safety and hazard information!
15.1
Intended use of the machine
The machinery is intended exclusively for the following operations: surface grinding of workpieces
of metal or similar materials which are not hazardous to health, flammable or explosive, in
automatic or manual operation, each within the prescribed technical limits.
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for other
activities and any resulting property damage or injuries!
15.1.1
Technical restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity:
Temperature (Operation)
Temperature (Storage, Transport)
15.1.2
Prohibited applications / Hazardous misapplications
-
Operating the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine outdoors
-
Operating the machine in a potentially explosive environment (machine can generate
ignition sparks during operation)
-
Operating the machine outside the technical limits specified in this manual
-
Using flammable liquid as coolant
-
Processing short and over-thin workpieces or workpieces with a complicated shape and
precarious centre of gravity position directly on the magnetic clamping plate
-
Adjusting the lubricant nozzle during wet grinding after the spindle has been switched on
-
Stopping the grinding wheel by hand or other objects
-
Moving or changing the workpiece when the worktable is moving or the grinding wheel is
rotating
-
Hitting the grinding wheel (e.g. disassembly/assembly of the grinding wheel)
-
Remove the safety markings attached to the machine
-
Modify, circumvent or disable the safety devices of the machine
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.
15.2
User requirements
The machine is designed for operation by one person. The physical and mental aptitude as well as
knowledge and understanding of the operating instructions are prerequisites for operating the
machine. Persons who, because of their physical, sensory or mental abilities or their inexperience
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
N O TE
max. 70 %
+5° C bis +40° C
-20° C bis +50° C
SAFETY
39
FSM25AUTO
Publicidad
