Publicidad
Idiomas disponibles
Idiomas disponibles
Oil bare machine parts (e.g. machine bed, tailstock sleeve, feed spindle) with an acid-free
lubricating oil.
17.1.3
Site requirements
Place the machine on a solid surface. A concrete floor is the best foundation for the machine (load
capacity ≥ 2000 kg/m
2
of the subfloor result from the technical data (dimensions, weight) of your machine. When
designing the working area around the machine, observe the local safety regulations. When
dimensioning the required space, take into account that the operation, maintenance and repair of
the machine must be possible without restrictions at all times.
The selected installation location must ensure a suitable connection to the electrical mains.
17.1.4
Anchorless assembly
The use of machine feet (not supplied) facilitates levelling of the machine and reduces
vibrations.
After the machine has been brought into the desired position at the intended installation location,
it must be levelled in the longitudinal and transverse axes using the pressure screws.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
). The space required by the machine and the required load-bearing capacity
N O TE
1 ... Table with magnetic chuck
2... Precision balance
ASSEMBLY
44
FSM25AUTO
Publicidad
