Publicidad
24
INPUT FPB/REC
OUTPUT
,....
~
'E
CD-
I
SELECT
MENU:
DORE3
ENTER :
EXIT : MENU
L
PUSH MENU
KEY
AT
EXACT
TIME
ON SCREEN DISPLAY (OSD) MENU
SYSTEM
Timer programs, clock setting, and other set up operations
are done
using an on-screen
display
(OSD) menu system which guides you
through each step. With the main unit turned on, use the remote control
to access the various menu screens.
Preparation
Have the TVon and tuned to the video channel or video input mode. (See
page 22.)
TO ACCESS THE OSD MENUS
1
2
3
4
Check the OUTPUT system indicator (NTSC) lights. If not,
press the OUTPUT SYSTEM (NTSC) button.
When
the connected TV is NTSC/PAL
multiple type, this operation
does not necessary.
For details, see "SETTING
THE OUTPUT SYSTEM"
on page
42.
Press the MENU button.
The main MENU screen appears.
Press the V or A button to move the cursor down or up.
At the desired operation, press the>
button.
The menu for the selected operation appears,
Within each menu, the screen shows which buttons to press to
perform the selected operation.
The illustration shows the CLOCK SET menu.
To exit or clear an OSD menu
Press the MENU button again.
MAIN MENU OPERATIONS
1
2
3
4
5
PROGRAM TIMER
To program the timer for an automatic recording. See page 64.
CLOCK SET
To set the date and time. See page 28.
LANGUAGE
To select the language
of the OSD: English, Germanic,
Spanish.
See page 26.
SET UP MENU
To setup the operating modes of this unit. See page 30.
TUNER PRESET
To preset channels on the internal tuner. See page 32.
Publicidad
