Publicidad
VIDEO IN
5
AUDIO IN
HV-MX1
AUDIO/VIDEO
OUT
INPUT
l!?
3'CH
LINE
"'"'
qlyp
RECORDING FROM OTHER
EQUIPMENT
DUPLICATING TAPES
l
By connecting
other video equipment
to this unit, video tapes can be
duplicated.
Preparation
Set the COLOR SYSTEM setting to "AUTO or to the color system of the
input source. (See page 30.)
1
2
3
4
Connect the video equipment.
Connect the AUDIOA/lDEO
OUTPUT from the other VCR to the
AUDIONIDEO
IN jacks on this unit.
Press the REC SYSTEM (NTSC, IPAL) button to select th[?
color system for recording.
Press the NTSC button for recording using the NTSC system,. For
using the PAL system press the PAL button.
For details, see "SEITING THE REC SYSTEM" on page 44.
Press the INPUT button.
"LINE" appears in the display.
Start playback on the other VCR and recording on this
unit.
When the AUDIO lN/WDEO IN jacks amthe front panel ar[?not
used H
Put the supplied pin jack cover on them. For removal, pull the left side
forward,
When connecting other equipments to the AUDIO lN/VIDEO IN jacks on
both the front and rear panels, the one connected to the front panel itakes
priority.
Publicidad
