KBS PAPRIKA Manual De Uso Y Mantenimiento página 50

UTILISATION
NAVIGATION IN THE MENU SCREEN
LANGUAGE: NAVIGATION LANGUAGE SETTING
1
2 °C
Make sure that the display is not locked. If this is the case, unlock it as indicated on the page 45.
Press and hold the MENU key for at least 3 seconds: the MENU SCREEN appears.
1
Press the SET key: the LANGUAGE SCREEN appears.
2
Press the UP or DOWN keys to set the desired language from those available (language highlighted in green= desired
3
language).
Press the SET key to confirm the choice made.
4
SERVICE
1
2 °C
Make sure that the display is not locked. If this is the case, unlock it as indicated on the page 45.
Press and hold the MENU key for at least 3 seconds: the MENU SCREEN appears.
1
Select the SERVICE item by pressing the UP or DOWN keys (item highlighted in white= selected item).
2
NOTE: the items Parameters, Data Memory Reset and Factory Val. Reset are reserved for authorised technicians and therefore
are protected by a password provided only by the Manufacturer.
Internal values
Cell T
27.8°C
Second Probe
27.7°C
INTERNAL VALUES: the screen
shows the values detected by the
probes assembled on the equipment.
Press the SET key to confirm the choice made.
3
Menu
Language
Service
Clock
rH/drH enabled
rH
Menu
Language
Service
Clock
rH/drH enabled
2
rH
Alarms
No Alarm
ALARMS: the screen shows any
alarms that have occurred.
49
English
Italiano
Deutsche
Frances 3
2
Español
Pyccкий
id: 1196AA02
Parameters
Internal values
Alarms
Data Memory Reset
3
Factory value reset
Haccp
Power failure
Power failure
HACCP: the screen shows all the
HACCP events that could cause
anomalies in the storage of the
contained food (e.g. door openings,
absence of power, etc.)
USE AND MAINTENANCE mod. PAPRIKA | Rev. 0
4
Service
Haccp