Angelo Po 04WFR3ED Manual De Uso E Instalación página 36

TABLE OF ALARM INDICATIONS
Alarm
EO
EOC
E2
AL1
HANDLING AND INSTALLATION
RECOMMENDATIONS FOR HANDLING AND INSTALLATION
Important
When handling and installing the appliance
comply with the information provided by
the constructor directly on the packaging,
on the appliance and in the instructions for
IT
GB
DE
FR
PACKAGING AND UNPACKING
The packaging is designed to reduce space and as
ES
appropriate to the type of transport used.
To simplify transport, some components may be re-
moved and suitably protected and packed for tran-
sport.
The packaging carries all information necessary for
loading and unloading.
When unpacking, check that all components are
present in the correct quantities and are undama-
ged.
The packaging material must be properly disposed
of in accordance with legal requirements.
English
Cause
Sensor has short-circuited
electrical connection faulty
Electronic control device faulty.
Loss of data set on the electronic
circuit board
The maximum permitted oil
temperature has been exceeded
use. If necessary, the person authorised to
carry out these operations must organise a
"safety plan" to protect the people directly
involved.
- 14 -
Remedy
Contact the after-sales service
Contact the after-sales service
Switch the appliance off
and back on;
if the problem persists, call the af-
ter-sales service
Wait for the oil to cool down;
if the problem persists, call the af-
ter-sales service
7
IDM-3960200170.tif