Eurocave V-LAPREMIERE-L Modo De Empleo página 36

6/ USING YOUR WINE CABINET FOR THE FIRST TIME
III-A. Description
A B
Nv
A
Lighting mode
B
Temperature zones concerned
C
Sensor fault alarm
D
Temperature alarm
E
Charcoal filter alarm
F
Confirmation and setting access key
G
Setting and selection keys
III-B. Temperature setting
Recommended temperature setting range for the low temperature: 7 - 9 °C / 45 - 48 °F.
Recommended temperature setting range for the high temperature: 17 - 19 °C / 63- 66 °F.
Press and hold down the
1
Press and hold down the
The display will start to flash.
2
Press the or
3
Press the button to confirm. The right-hand display will flash.
The value shown on the display is the actual temperature inside
the cabinet. It is therefore necessary to wait before your new
setting takes effect.
16
GB
(multi-temperatures S-LAPREMIERE-L)
C D E B
M L K
key for 3 secs to power up.
2 sec.
5 sec.
key for approximately 2 secs.
keys to set the desired temperature.
F G H
J I
H
Lighting mode access and confirmation key
I
Charcoal filter meter access key
J
ON /OFF key
K
High temperature in cabinet display
L
Hot circuit indicator
M
Cold circuit indicator
N
Low temperature in cabinet display
4
Press the or
5
Press the button to confirm.
• For the low temperature, the default setting is 8 °C / 46 °F. However you
can set the temperature between 5 - 10 °C / 41 - 50 °F.
• For the high temperature, the default setting is 18 °C / 64 °F.
• However you can set the temperature between 15 - 20 °C / 59 - 68 °F.
N.B: in order to operate correctly, your cabinet must be placed in a room
with a temperature of 12-30 °C / 54-86 °F.
The tactile keys are very sensitive.
There is no need to apply force, a light
touch is sufficient to register the
command. Remember to remove your
finger from the panel between presses.
keys to set the desired temperature.