BOJ ALBA Manual De Uso página 13

After steam is finished, long press the knob for 3 seconds to exit steam

function (Pic 1). At this time, the boiler temperature is too high and the
icon " " flashes (Pic 2). Turn the knob of the water distributor to
the " " position to start making hot water cooling boiler (Pic 3). When
the temperature of the boiler cools down, the water pump will stop
automatically.Turn the knob of the water distributor back to the "
position (FIG. 4), and the machine will return to the standby state
display.
Long press 3 seconds（Pic1）Boiler temperature too high（Pic2）
Hot-water Making（Pic3）
Note:
After the steam ends, the boiler temperature is too high and the
icon "
boiler, the boiler will return to the standby state naturally, and
the waiting time will be long.
（Pic4）
" flashes. If no hot water is produced to cool the
13
- 13 -
"
Flash