BOJ ALBA Manual De Uso página 29

Abnormal Display：
A、" "and" "flash at the same time
The boiler temperature is too high, or the boiler temperature is too

low, or the temperature sensor is damaged.
Shut down a period of time after restart, if still can not solve the
problem, need to send for maintenance.
B、" " and"
It will return to normal after 5 seconds, indicating that the water tank

is short of water or the waterway is not smooth or the flow meter is
damaged. After making hot water for several times, if the
phenomenon is the same, it should be sent for maintenance.
C、" "、"
During the startup preheating or steam preheating process, the

knob is in the "
"position.
If making hot water more than 200mL continuously, twist the knob

back to "
water.
If making steam continuously more than 120 seconds,need to twist

the knob back to the "
make steam.
When making coffee or setting the amount of coffee, the knob is in

the " " position. Just twist the knob back to the"
"the red indicator lights are shining alternately
"、" "and" "flash at the same time
" position. Just twist the knob back to the"
" position and then twist again to "
" position and then twist again to "
29
- 29 -
" to make hot
"to
"position.