BOJ ALBA Manual De Uso página 17

Before using：
（Rinse the new machine before brewing the first cup of coffee）
1. Make sure that the power plug of the machine is removed from the power
socket.
2. First remove the tank, cooking basket and strainer, then clean with a mild
detergent and water mixture. Rinse each one thoroughly and put them back.
Refer to the instructions below on "How to Brew Espresso" before removing
the strainer and brewing basket. (Do not immerse the machine in water or try
to touch any of its internal parts)
3. Washing inside the machine: Add water to the tank, switch on the power
supply,○ first make 100mL hot water according to the steps listed in the
1
"Make hot water" function, ○
"How to make Espresso", pour out the hot water in the cup. Repeat Step○
for 2-3 times.
1. Please make sure that the knob of the water distributor is in position "
and that the power plug of the machine has been unplugged from the
power socket;
2. Fill the tank with water, you can use another container to fill it or take it out
of the machine and fill it up at the tap. Make sure the water is within the
"MIN" and "MAX" marks on the tank. Never fill the tank with warm or hot
water. Close the tank cover. As shown below
then use flushing according to the steps listed in
2
How to make Espresso
17
- 17 -
○
1 2
"