Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
No coffee in the first use: The machine has cleaned the water in the
internal pipe before leaving the factory, which may cause the pressure
pump idling to make no coffee. Solution: After 100mL hot water is poured
into the coffee machine, the machine can be restored to normal use.
The metal part of the basket may still be hot. When removing the filter, be
sure to use another tool other than your hand. Cool the parts by running
them under cold water. Make sure the parts have cooled before removing
them.
How to make Cappuccino
A cappuccino is an espresso with foaming milk on top. Cappuccino foaming milk
takes practice. Don't be discouraged if it's not perfect the first time. The foaming
milk should be half milk (bottom) and half foam (top). It may take you a few
times to perfect this process.
For best results, we recommend brewing the milk in a professional stainless
steel jug and then pouring the milk into the coffee. Do not use a stainless steel
kettle that has been cleaned with warm water. Milk is cold to the touch (about
4°C).
The first step in making a cappuccino is to make an espresso. Therefore,
please fill the tank with cold water. Never fill the tank with warm or hot
water.
1.
Insert the power cord into the power socket and press the knob to turn on
the boiler to start preheating (Pic 1). During the preheating process, the
four icons of "
machine will enter the standby state and the display will be steady on (Pic
2).
" will turn and shine. After the preheating, the
22
- 22 -
Publicidad
