Fri-Jado TDR Serie Modo De Empleo página 43

1.3. Service and technical support
The electrical schematics for your unit is included. In case of malfunctions you can contact
your dealer/service agent. Make sure you have the following data available:
• Model
• Serial number.
This data can be found on the identification plate.
1.4. Identification of the unit
The identification plate can be found on the right side of the column, and contains the
following data:
1.5. Safety instructions
General
The manufacturer accepts no liability whatsoever for loss or injury caused by failing to strictly
adhere to the safety guidelines and instructions in this manual or due to carelessness during
installation, use, maintenance and repair of the unit referred to in this manual and any of its
accessories.
The user of the unit will be fully responsible for abiding the locally prevailing safety- rules and
regulations.
The unit may be operated by qualified and authorised persons only. Anyone working on or
with this unit must be familiar with the contents of this manual and carefully follow all
guidelines and instructions. Never change the order of the steps to be performed. The
management must instruct the personnel on the basis of this manual and follow all
instructions and regulations.
The pictograms, labels, instructions and warning signs attached to the unit, are part of the
safety measures. They may never be covered or removed, and have to be clearly visible
during the entire lifetime of the unit.
Immediately repair or replace damaged or illegible pictograms, warnings and instructions.
TDR 5 / TDR 8 / TDR 5+5 / TDR 8+8
Figure 1.8 (Identification plate TDR)
www.frijado.com
9123827 / 1007
11