Fri-Jado TDR Serie Modo De Empleo página 54

If you are using meat baskets (see figure 3.8), act as follows:
•
With both the TDR 5 and TDR 5+5, you must stick the ends of the meat baskets
through the appropriate holes of the rotor disks (see figure 3.8).
•
With both the TDR 8 and TDR 8+8 you must attach the meat baskets to the
appropriate pins
Whilst loading the unit with meat baskets, you must see to it, that the rotor gets evenly
loaded, so that the mass of the products is evenly spread over de rotor, causing an equal
balance.
Also see to it that no meat parts are sticking out of the baskets.
3.2.3. Loading the rotisserie using chicken racks (accessory)
When using chicken racks, (see figure 3.10), you can use the principle as described in
paragraph 3.2.2.
TDR 5 / TDR 8 / TDR 5+5 / TDR 8+8
(see figures 2.3 and 3.9).
Figure 3.9
Figure 3.10
www.frijado.com
9123827 / 1007
22