Publicidad
Idiomas disponibles
Idiomas disponibles
16 - TIMER SETTING
-tM
With the
menu, you can adjust the time of the RTC on the
control unit and set up to 8 timers to open and/or close the gate at
the preset times, with weekly programming.
16.1 - CLOCK SETTING - SEt
To use the timing functions, you should set the clock on the control
unit.
SEt
Enter the
menu and set the year, month, day and time using the
h
i
and OK:
keys
,
Y 20
g
indicates the year 2020
M 1 1
g
indicates the month 11 (November)
d 1 6
g
indicates the day of the month
h 1 1
g
indicates the time
m 1 4 g
indicates the minutes
Having set the above parameters, you can enable the day light
saving function which allows the clock on the control unit to remain
aligned with the correct time during the changes between the
standard/ daylight saving time.
dLS.Y
NOTE: setting the
parameter, the automatic time change on
the given dates will be enabled.
Having terminated the settings, press OK to confirm and save the
new parameters.
16.2 - TIMINGS SETTING - tEM
You can set up to 8 timings and a different command can be enabled
for each of these.
tEM
1. Enter the
menu and select the desired timer using the keys
h
i
,
and OK (see diagram from point 2 onwards).
2. Select the desired function to associate with the timer.
The functions available for the timers are as follows:
ChiU
: execute a closure command at the time set.
oroL
: allows you to set a time for automatic opening and one
for automatic closure. Between the opening time and
closure time, you can control the gate opening or closure
using commands.
Prio
: sets a time for automatic opening and one for automatic
closure. Between the opening and closure time, all the
commands are disabled.
This allows you to be sure that the barrier within these
times stays open.
3. Set the times of the timer (*)
- 76 - ENGLISH
(*) Setting of timer times
1. The display shows the opening time currently set (diagram 2
panel A) : the hours flash
NOTE: the top arrow beside the seconds is on to indicate the
opening time is being programmed
2. Adjust the time using the keys
minutes flash
3. Adjust the time using the keys
4. The display shows the closure time currently set (diagram 2 panel
B) : the hours flash
NOTE: the bottom arrow beside the seconds is on to indicate the
closure time is being programmed
5. Adjust the time using the keys
minutes flash
6. Adjust the minutes using the keys
the display shows the day of the week
M
tu
(
= Monday,
= Tuesday,
Fr
SA
= Friday,
= Saturday,
function on that day is enabled (
7. Set the desired parameter for each day then select
and exit; the display shows the timer just set (e.g.
SAVE
8. Select
to save the settings: the display shows the control
panel
NOTE: when a timer is saved, it will be identified on the display by
the flashing cursor to the side (e.g.
CANCELLING PROGRAMMED TIMERS
To delete programming of a timer, proceed as follows:
tEM
1. Enter the
menu and select the desired timer using the keys
h
i
,
and OK (see diagram from point 2 onwards).
2. The programmed timer is identified on the display by the flashing
cursor to the side (e.g.
CAnC
3. Select the
function: the display shows the timer which has
just been cancelled (e.g.
SAVE
4. Select
to save the settings: the display shows the control
panel
16.3 - SUPSENDING TIMERS - SUSP
SUSP
Using the
parameter, you can suspend the timers for a period
which can be selected ranging from a minimum of 6 hours to a week.
In this period, any programmed timers will be considered.
This function is very useful for the end client if he or she wants to
suspend openings/closures previously programmed without however
deleting them.
SUSP
1. Enter the
menu and select the period for which you want
to suspend the timers:
g
6 h
6 hours
g
12 h
g
12 hours
1. dAY g
1 day
2. dAY g
2 days
3. dAY g
3 days
WEE g
1 week
2. Select OK to confirm: the display shows the control panel
h i
and press OK to confirm: the
h i
and press OK to confirm
h i
and press OK to confirm: the
h i
and press OK to confirm:
W
th
= Wednesday,
= Thursday,
Su
= Sunday) displaying if the
Y
n
) or disabled (
)
ESC
tM. 1
tM.2
)
tM.2
)
tM. 1
)
to save
)
Publicidad
