V2 NUUR4 Manual De Instrucciones página 82

17 - TRAFFIC LIGHT FUNCTION
A traffic light can be connected on the control unit to indicate to the
vehicle when it can go through the opening, or two traffic lights to
adjust the entry direction.
For connection of the traffic light, you can use the Synclux optional
board; if you want to add this board, or if already used for the lights
on the boom, you can use the output of the low voltage lights to
connect the traffic light directly to the control unit, giving up the other
functions on this output.
Function: green light only
SEM Grn.L
=
Boom opening: flashing green
Boom opened: fixed green
All other cases: off
NOTE: The hold electromagnetic
functions and the courtesy light
remain available.
Function: red light only
SEM rEd.L
=
Boom closing: flashing red
Boom closed: fixed red
All other cases: off
NOTE: The hold electromagnetic
functions and the courtesy light
remain available.
- 80 - ENGLISH
The traffic light function must be enabled on the
SEM
therefore the menu allows you to choose which function
you want to be executed. For some functions, you must use other
outputs of the control unit; in this case, the functionalities are lost of
the electromagnet and the courtesy lights.
SPIA
menu,