DJO Global Intelect Legend 2 Manual Del Usuario página 22

22 PATIENT PREPARATION
ELECTROTHERAPY PATIENT PREPARATION AND
ELECTRODE PLACEMENT
• Examine the skin for any wounds and clean the
skin.
• Apply the electrodes to the treatment area.
• Ensure the electrodes are applied securely to the
skin.
• Ensure good contact between each electrode and
the skin.
• Check the electrode contact regularly during the
treatment.
• Examine the skin again after the treatment.
• Choose electrodes that fit the anatomy.
• Prior to administering treatment, view the Electrode
Placement recommendations in the Treatment
Review screen for the selected modality.
• Follow electrode manufacturer instructions.
• Please note the smaller the electrode size the
higher the current density.
DURA-STICK Electrodes
®
DURA-STICK Electrodes are a self adhesive, disposable
®
product designed specifically for use with Intelect®
Legend 2.
It is recommended that DURA-STICK
whenever possible to ensure the highest level of contact
with the treatment area and most uniform delivery of the
prescribed electrotherapy treatment.
For Electrotherapy operation refer to page 30
DURA-STICK Electrode Instructions
®
Connecting Lead Wires
1. Insert the lead with the Red (+) electrode connector
into one DURA-STICK
®
2. Insert the lead with the Black (-) electrode connector
into the other electrode.
3. Make certain the lead wires are seated completely
into the electrodes.
NOTE: Use of conductive medium or sponges is not
required or recommended. DURA-STICK
manufactured to ensure the optimum conductivity during
therapy when properly applied.
INTELECT LEGEND 2 USER MANUAL
®
Electrodes be used
®
Electrode.
electrodes are
®
Securing Electrodes
1. Remove the DURA-STICK
protective backing.
2. Apply to the treatment area as prescribed.
3. Ensure the entire electrode surface is in contact with
patient skin by pressing into place.
EN
Electrodes from the
®