DJO Global Intelect Legend 2 Manual Del Usuario página 30

30 USER INTERFACE
ELECTROTHERAPY OPERATION
Complete the following steps to begin Electrotherapy treatment:
1. Prepare patient and therapy system for Electrotherapy.
selection, preparing the patient, and securing electrodes.
2. Select ELECTROTHERAPY icon from the home screen
3. Select desired waveform
Note: Refer to the System Specifications section of this manual for all waveform specifications for the Intelect
4. SET UP TREATMENT
On the treatment review screen - you can adjust treatment parameters to desired level.
Never start with intensity adjustment – first adjust all other parameters and set Intensity just before starting treatment
Pressing the save button will save the treatment as a custom protocol which can be named by the user
Pressing the Assign to button will give two buttons
-Assign to: this button assigns the treatment data to a specific treatment data file which can be named by the user
-Open pain scale: this button opens up the pain scale so the pre treatment pain can be recorded
5. START TREATMENT
Press the start/pause button
7. PAUSE TREATMENT
Press the Start/Pause button
INTELECT LEGEND 2 USER MANUAL
®
Refer to the PATIENT PREPARATION section on for electrode
Touch to select
Swipe horizontally to see more
EN
Legend 2.
®