Klarstein 10033248 Manual Del Usuario página 32

EN
GETTING STARTED
Unpacking
Remove all packaging materials and labels from inside and outside the device
and its components. Make sure there is no packaging under or around the
components.
Initial cleaning
Clean the device as described in the CLEANING AND MAINTENANCE section.
Inserting the components
Insert the components as needed, as described below.
Insert drip tray
Carefully open the door and slide the drip tray into the unit on the side rails as
shown in the picture.
Insert grill grid
Carefully open the door and slide the drip tray into the unit on the side rails as
shown in the picture.
32