Standby mode
The device switches to standby mode after 60 seconds:
•
when the device is in standby mode and you do not press any key or
•
when no program is running.
In standby mode, all buttons are inactive except for the On/Off, MENU and PRESET
buttons. Press the MENU button to wake up the device from standby mode.
Delay start
The appliance offers a start delay of 1-60 minutes to start cooking at a specific time
in the future.
1
Press the
(Delay Start) button to set the start time. The default start delay
of one hour appears on the display. Each press of the + or — button changes
the time by 1 minute. The device generates a confirmation tone each time a
button is pressed and the currently set time value flashes on the display. You
can press and hold the button to quickly change the temperature.
•
Press the + button to increase the time.
•
Press the — button to decrease the time.
The current time value in the display stops flashing and lights up continuously
again if you do not touch the + or - button for a few seconds.
2
After you have selected a program and adjusted the cooking time and
temperature if necessary, press the On/Off button to start the cooking
process.
Note: Your entries are not saved permanently, they are only saved for the
current cooking process.
EN
39