Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
REPLACING THE TOP BURNER NOZZLE (Ø 110 - 7 KW)
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Remove the grid (A).
2)
Extract the burner (B).
3)
Unscrew the nozzle (C) and
4)
replace it with the one suit-
able for the type of gas in
use (see table at back of
manual).
Replace the burner and the
5)
grid.
REPLACING THE TOP BURNER NOZZLE (Ø 130 - 10 KW)
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Pull off the knob (A).
2)
Undo the screws (C) and remove the control
3)
panel (B).
Unscrew the nozzle (D) and replace it with the
4)
one suitable for the type of gas in use (see ta-
ble at back of manual).
Replace the control panel (B) and the knobs
5)
(A) on completion of the operation.
REPLACING THE TOP BURNER PILOT LIGHT NOZZLE
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Pull off the knob (A).
2)
Undo the screws (C) and remove the control
3)
panel (B).
Unscrew the union (D).
4)
Remove the nozzle (E) and replace it with the
5)
one suitable for the type of gas in use (see ta-
ble at back of manual).
Retighten the union (D).
6)
Replace the control panel (B) and the knobs
7)
(A) on completion of the operation.
16
A
B
C
A
C
B
C
A
C
B
3319961_inst_GB_rev.1
REPLACING PARTS
C
D
8
D
E
10
8
Publicidad
