Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
► Source of hazard: Appliance mechanics
Hazard
Risk
of
crushing
parts of the body in
case of tip-over or
fall of the appliance
HAZARDS AND SAFETY PROVISIONS DURING ASSEMBLY
When assembling the appliance, watch out for the following hazards and provide for the counter-
measures indicated below:
► Source of hazard: Handling of heavy loads
Hazard
Risk of injury due to
body overload
3319961_ut_GB_rev.1
Where or in which situations
does the hazard occur?
• When the appliance moves • Use a suitable lifting
Where or in which situations
does the hazard occur?
• When
the
appliance
moves
Countermeasures
device
• Pay attention to the
centre of gravity
• Avoid collisions
Countermeasures
• Use a suitable lifting de-
vice to place the appliance
on the work bench, on the
base
• Adjust the position only if a
suitable number of people
is available, otherwise ob-
serve the limit values for
lifting and transport
• Comply with the applicable
laws on accident preven-
tion for the installation
place
• Wear personal protective
equipment
ENGLISH
Safety device
• Protective gloves
• Protective shoes
• Safety
helmet
(e.g.
for
sus-
pended
loads,
overhead opera-
tions...)
Safety device
• PPE as required
by the applicable
laws in the coun-
try of use.
5
Publicidad
