Descargar Imprimir esta página

Angelo Po 0N0FAA Manual De Uso página 44

Cocina fuegos abiertos
Ocultar thumbs Ver también para 0N0FAA:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
The precautions which follow are also impor-
tant.
WARNING: When using detergents,
rubber gloves, protective mask and safety
goggles must be worn in accordance with
the relevant safety regulations.
– Clean all parts of the appliance with warm wa-
ter, food-approved detergents and non-abra-
sive materials only.
– Thoroughly clean all parts which come into di-
rect or indirect contact with foods and all sur-
rounding areas.
– After use, clean the accessories with a suit-
able grease-remover product. We recommend
washing them in the dishwasher.
WARNING:
parts such as the burners, burner caps and
grids in a dishwasher.
CLEANING THE HOB, BURNERS AND ACCESSORIES
Avoid leaving the components dirty for long
and, periodically,according to the intensity of
work (if necessary daily),proceed as indicated
below:
Turn off the equipment and let it cool down.
1)
Remove the grill, the burner cap (A) and the
2)
burner (B).
Put them to soak in hot water with dishwasher
3)
soap.
Wash with a normal sponge and if necessary a
4)
scourer to remove any dirt thoroughly.
Check that the holes of the burner cap (A) are
5)
always completely clear for the regular fl ow of
gas. To remove possible dirt, insert a metal rod
(wire) into the hole and slide it through until it
is thoroughly clean.
Check the burner (B) ignition slot (cutoff ) is
6)
always completely clear for the normal fl ow
of gas. To remove any dirt, insert a blade like
a trimming knife in the slot, sliding it around
until it is thoroughly clean.
20
Do not wash cast iron
WARNING: Never use products con-
taining substances that are harmful or dan-
gerous for people's health (solvents, fuels,
etc.).
– Rinse surfaces with drinking water and dry.
– Pressurised water jets may only be used on ex-
ternal parts.
– Take special care not to damage stainless steel
surfaces. In particular, avoid the use of corro-
sive products and do not use abrasive materi-
als or sharp tools.
– Remove food residues immediately before
they set.
– Remove the limescale deposits which may
form on some of the appliance's surfaces.
SERVICING
A
B
3319961_ut_GB_rev.1

Publicidad

loading