Descargar Imprimir esta página

universalblue UBE2417-22 Manual De Instrucciones página 36

Placa vitrocerámica

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
the power supply with an
all pole isolator. (There must
be at least a 3 mm distance
between contacts in "OFF"
mode) These isolators are
circuit breakers protecting
against overvoltage.
If the appliance is defective
disconnect it from the mains
and/or the fuse box
Humidity inside the appliance
can lead to electric shock
(do not use high pressure or
steam cleaners).
If you notice any type of break
or crack there may be danger
of electric shock
Magnetic or electronic devices
(computers, credit cards...)
can be affected if they are
located near the hob (because
of the electromagnetic field).
Do not use pots/pans with
irregular
cleaners,
objects on the hob.
Please
instructions to save energy
when using your appliance:
Using a lid with your pots and
pans saves a lot of energy,
because heat does not escape
(it would be better if it´s a
glass lid because you will be
able to watch the cooking
process without having to lift
the lid.
Cooking containers with flat
36
edges,
vacuum
or
very
heavy
follow
these
bottoms reduce the energy
consumption considerably.
The more similar the diameter
of the pot/pan with respect to
the cooking area is, the more
efficient
the
will be.
Use a small cooking container
when you cook small portions
(bigger containers will take
longer to finish the cooking)
Use low power levels for slow
cooking.
PRODUCT FEATURES
The package contains the following items,
besides this manual and the product
warranty. See image 01 on page 4.
Note: Images are for reference only. The
actual contents may vary depending on
the model.
1. Small heating zone (14 cm and 1200W)
2. Big heating zone (18 cm and 1800W)
3. Ceramic glass
4. Control panel
5. Lower left heating zone indicator
6. Upper left heating zone indicator
7. Upper right heating zone indicator
8. Lower right heating zone indicator
9. Decrease power
10.
Increase power
11. Power on/off button
In order to know more about the product
features, see table 01 on page 12.
ASSEMBLY AND INSTALLATION
Before
using
this
the
packaging
the product. If the appliance could be
damaged, contact the selling point where
you purchased it.
• Verify that the electrical installation
consumption
appliance,
remove
and
carefully
inspect

Publicidad

loading