Mounting The Bike Handle - Stihl FS 460 C-M Manual De Instrucciones

2 STIHL AutoCut 40-2
3 STIHL AutoCut 40-4
4 STIHL AutoCut 46-2
5 STIHL TrimCut 41-2
6 STIHL DuroCut 40-4
7 STIHL PolyCut 41-3
Metal cutting attachments
8 Grass cutting blade 230-4
(230 mm dia.)
9 Grass cutting blade 255-8
(255 mm dia.)
10 Grass cutting blade 250-44
(250 mm dia.)
11 Brush knife 300-3
(300 mm dia.)
12 Scratcher tooth circular saw blade
200
(200 mm dia.)
13 Chisel tooth circular saw blade 200-
22 (4119), chisel tooth circular saw
blade 200-22 HP (4000)
14 Scratcher tooth circular saw blade
225
(225 mm dia.)
15 Chisel tooth circular saw blade 225
(225 mm dia.)
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stops
16 Deflector for mowing heads
FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L
17 Deflector for metal cutting
attachments, items 8 to 11
18 Limit stop for circular saw blades,
items 12 and 13
19 Limit stop for circular saw blades,
items 14 and 15
Harness
20 Full harness must be used
WARNING
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of
control and contact with the cutting
attachment.
Use grass cutting metal blades, brush
knifes and circular saw blades on this
unit only if equipped with a bike handle.
Do not use rigid polymer blades on this
unit.

Mounting the Bike Handle

Mounting Bike Handle with Swivelling
Handle Support
1
Do not rotate the control handle (1)
between unpacking and mounting it on
the handlebar; see also chapter on
"Adjusting the Throttle Cable".
2
4
The machine is shipped with the clamp
moldings (4) mounted on the
handlebar (2).
Do not change the position of the
N
clamp moldings on the handlebar
until the control handle is mounted.
English
19