Stihl FS 460 C-M Manual De Instrucciones página 22

English
Mounting the Handlebar
To assemble the swivelling handle
support it is necessary to fit a spring in
the clamps and secure them to the
handle support on the machine.
5
Use the spring (5) from the parts kit
N
supplied with the machine.
Push the spring (5) into the lower
N
clamp molding (6).
20
4
7
Position the clamp moldings (4) with
N
handlebar (2) on the handle
support (7).
Do notrotate the handlebar in the
N
clamp moldings.
8
Raise the grip of the wing screw (8)
N
to the upright position.
2
Position wing screw (8) in threaded
N
insert in handle support (7) –
against pressure of spring (5).
Position the clamp moldings so that
N
the tabs (9) on the lower clamp
molding (6) line up with the
slots (10) in the handle support (7).
Rotate wing screw clockwise until
N
the lower clamp molding (6) butts
against the handle support (7).
Only tighten the wing screw
N
moderately.
FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L
5
8
7
6
9
7
10
6
7