Stihl FS 460 C-M Manual De Instrucciones página 24

English
A
2
Position the handlebar (2) so that
N
distance A is about 17 cm (7 in).
Do not clamp the curved part of the
handlebar.
Closing the wing screw
Rotate the wing screw clockwise
N
until it becomes difficult to turn.
Tighten down the wing screw firmly.
N
22
Fold the grip of the wing screw down
N
so that it is flush.
Checking the Throttle Cable
After mounting the control handle,
N
check the throttle cable – see
chapter on "Adjusting the Throttle
Cable".
Swiveling the Handlebar
Transport position
Loosen the wing screw (8) and
N
unscrew it until the handlebar (2)
can be turned clockwise.
Turn the handlebar 90° and then
N
swing the handles down.
Tighten down the wing screw (8)
N
firmly.
Working position
Reverse the sequence described
N
above to swing the handles up and
turn the handlebar
counterclockwise.
FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L
2
8