Engine Running Behavior; Storing The Machine; Sharpening Metal Cutting Blades - Stihl FS 460 C-M Manual De Instrucciones

Engine Running Behavior

If engine running behavior is still
unsatisfactory after servicing the air filter
and adjusting the throttle cable, the
cause may be the muffler.
Have the muffler checked by a servicing
dealer for contamination
(carbonization).
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L

Storing the Machine

If the machine is to remain out of use for
approx. 3 months or more
Drain and clean the fuel tank in a
N
well ventilated place
Dispose of fuel in accordance with
N
the regulations and having regard
for the environment
Run the engine until the carburetor
N
is dry. This helps to prevent the
carburetor diaphragms sticking
together.
Remove, clean and inspect the
N
cutting attachment. Treat metal
cutting attachments with protective
oil.
Thoroughly clean the machine
N
Store the machine in a dry and safe
N
place, out of the reach of children
and other unauthorized users
Sharpening Metal Cutting
Blades
Use a sharpening file (see "Special
N
Accessories") to sharpen dull
cutting attachments. In case of
more serious wear or nicks:
Resharpen with a grinder or have
the work done by a dealer – STIHL
recommends a STIHL servicing
dealer.
Sharpen frequently, take away as
N
little metal as possible – two or three
strokes of the file are usually
enough.
1
2
1
2
Resharpen the teeth (1) uniformly –
N
do not alter the contour of the parent
blade (2) in any way.
See cutting attachment packaging for
additional sharpening instructions. Keep
the packaging for future reference.
English
1
2
39