Descargar Imprimir esta página

Dreame DreamBot L10s Pro Ultra Heat Manual Del Usuario página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
Routine Maintenance
EN
Dust Bag
1. Discard the dust bag.
Note: Pulling upwards on the handle will seal the bag to prevent the dust
and debris from accidentally falling out.
2. Remove the dust and debris from the filter with a dry cloth.
18
3. Install a new dust bag.
4. Close the cover of the dust tank.
Routine Maintenance
Used Water Tank
1. Remove the used water tank, open its cover and pour out the used water.
2. Rinse the used water tank with clean water, and use the provided cleaning
tool to clean the inner wall of the used water tank.
Note: The float ball in the used water tank is a movable part. Do not apply
too much force when cleaning it to avoid damaging it.
Main Brush
1. Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
2. Pull out the brush covers at both ends of the brush as shown in the figure.
Use the provided cleaning tool to remove the hair tangled in the brush.
EN
19

Publicidad

loading