Duke CSW-1 Manual De Montagem página 7

Operating instructions:
1. Place empty pans or cover the ducts with lids.
2. Place the buttons in the Hold position.
3. Let the ducts warm up for at least 20 minutes.
4. Place completely hot food in pans and preheated
unit. This unit is not designed to reheat cold food.
5. At the end of the day, remove the pans with food and
the lids and turn off the unit.
6. Allow the unit to cool and clean it following the
cleaning instructions.
To comply with hygiene requirements, do not set the
temperature control to keep the product below 68 ° C.
Checklist for operation and Cleaning guide
DAILY
Initial Checklist
1. Place empty pans or cover the ducts with
lids.
2. Place the buttons in the Hold position.
3. Let the container containing the product
warm up for at least 20 minutes.
Instructions / settings for operation:
1. The indicator light will be on while the
control is in the ON position
Final Checklist:
1. Set the buttons to the OFF position.
2. Remove all pans and their lids.
3. Allow the unit to cool for approximately
30 minutes.
4. Clean the dry duct unit, as described in
the cleaning instructions.
Cleaning instructions:
1. Turn off the unit and let it cool before
cleaning its surfaces.
2. Apply a soft cloth or sponge, soaked in
hot water and mild detergent, on the
outside and top of the unit.
3. Pass the cloth or sponge inside the
heated dry conduit. Do not use exces-
sive amounts of water. Do not drain the
water from the sponge or cloth in the dry
conduit. Plastic scourers can be used to
remove the remains of hardened or toast-
ed food.
4. Clean the pans and lids with mild deter-
gent and hot water, or in a dishwasher.
Installation and Operation of: Counter Soup Warmer
Danger of electric shock. Do not wash it with water
jets or a hose. Do not use caustic cleaning agents, ac-
ids, ammonia products, abrasive cleaners or abrasive
cloths. These could damage stainless steel, aluminum
and plastic surfaces.
Problem solving:
In the counter warmer unit of Duke, there are no parts
that can be repaired or maintained by the user. If any
anomaly occurs, check all switches and circuit breakers.
Check the product classification label and confirm that
the unit is operating at the correct voltage. If the anoma-
ly continues, contact your authorized Duke Manufactur-
ing service representative or call +420 323 608 193
TO RECEIVE CUSTOMER SERVICE:
As assistance in order to report in case of loss or theft,
please write down the model number and serial number
that is located on the unit. We also suggest that you write
down all the information that appears on the list and
keep it as a reference for the future.
+420 323 608 193
MAINTENANCE, PARTS, ADDITIONAL CLIENT INFORMA-
TION
TO CONTACT WRITTEN:
Duke Manufacturing CR, s.r.o.
P3 Logistic Parks: P3 Prague D11
Zeleneč, Mstětice 1052
250 91 Zeleneč, Mstětice
Středočeský kraj Hala DC6
Czech republic
E-mail: service.emea@dukemfg.com
Office Prague: +420 323 608 193
TO ACCESS THE INTERNET: www.dukemfg.com
We recommend that you provide the following informa-
tion when you write or call: model number, serial num-
ber, purchase date, your complete email address (includ-
ing zip code) and the description of the problem
MODEL NUMBER_____________________________
SERIAL NUMBER_____________________________
DATE OF PURCHASE__________________________
DISTRIBUTOR_______________________________
PHONE_____________________________________
MAINTENANCE SERVICE______________________
PHONE_____________________________________
7