Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Tile Cutting Wheel
For maximum performance and safety, it is recommended that you use the 7 in. cutting wheel provided
with your saw. Additional cutting wheels are sold separately.
WARNING
• DO NOT use cutting wheels rated less than the no load speed of this tool. Failure to heed this warning
could result in personal injury. DO NOT use a wheel with cracks, gaps, or teeth.
Installing the Tile Cutting Wheel
WARNING
• A 7 in. tile cutting wheel is the maximum wheel capacity of the saw. NEVER use a wheel that is too
thick to allow wheel washer to engage with the flats on the spindle. Larger wheels will come in contact
with the splash guard, while thicker wheels will prevent the wheel bolt from securing the wheel on the
spindle. Either of these situations could result in serious accident and can cause serious personal
injury.
1. Unplug saw and loosen two screws on the protective
guard (I) with a Phillips screwdriver (not included), and
remove the protective guard (I).
2. Place arbor nut wrench (E) on arbor nut (CC), then
slide arbor wrench (F) onto arbor.
1
2
CC
12
Screw
I
2
Screw
2
E
F
kobalttools.com
Publicidad
