Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
3. Holding arbor wrench (F) firmly to prevent the wheel
from moving, push the arbor nut wrench (E) to the
front of the saw (in clockwise direction) to loosen arbor
nut (CC).
4. Remove arbor nut (CC) and outer washer (EE),
leaving the inner washer on the arbor.
WARNING
• ALWAYS install the inner wheel washer before placing
wheel on arbor. Failure to do so could cause an accident
since the wheel will not tighten properly.
NEVER use wheels that have openings, grooves, or
teeth on this tool.
5. Place cutting wheel (L) onto arbor with arrows on
wheel pointing to the front of saw (in the clockwise
direction. Replace the outer washer (EE). The double
"D" flats on washers align with flats on arbor. Replace
arbor nut (CC) on arbor. Make sure flat side of arbor
nut touches outer washer (EE).
3
4
5
13
E
F
EE
CC
L
EE
CC
Flats
kobalttools.com
Publicidad
