Lincoln Electric HARRIS PERFECTFLAME ST Instrucciones De Uso Y Seguridad página 11

Model ST Job Setup - Job Setup Overview
Create New Job Setting - Follow the steps below to create a new Job Setting
Once Flame Settings are defined, they need to be added to a Job Setting to
allow operators to run in Production Mode. The Model ST allows users to
define and save up to 25 total Job Settings. These settings are displayed on
the screen in the order that they are added to the system. The Job Setup
menu will display five (5) settings per page. Use the Up and Down buttons
to scroll through the list (5 records at a time) as Job Settings are added.
From this screen, users can create, edit, duplicate, or delete Job Settings,
and designate Job Settings to be made available in Production Mode.
Press Setup Mode to return to the Setup Mode Menu.
Press the Home icon to return to the Main menu.
1. Press Create New to enter the Job Setup.
2. Provide a name for the Job Setting and press Enter. NOTE: Job names
must be unique.
3. Select the Flame Settings for each position by pressing the button
at the end of the corresponding row.
4. Press Select to add the Flame Setting to the position. If the Flame
Settings library contains more than 5 entries, press the Up and Down
buttons to view additional Flame Settings. NOTE: Flame Settings for a
particular job must use the same Gas Type and Unit Format.
11