Publicidad
Idiomas disponibles
Idiomas disponibles
6. TRANSPORTING/STORAGE
Loading and Unloading
Position the mower so all four wheels are on the bed of the transport vehicle.
Tie the mower down with rope or straps, and block the wheels. Keep the tie-
down rope or straps away from the controls, adjustment levers, cables, and
the carburetor.
NOTICE
• To prevent losing control of or damaging the mower, do not use the drive
system when going up or down a loading ramp.
• To prevent damaging the drive system, do not engage the clutch when the
mower is rolling backwards.
1. Turn the fuel valve to the OFF position (page 29).
2. Use a suitable loading ramp. Adjust the loading ramp so that it is inclined at
an angle of less than 15°. If a loading ramp is not available, two people
should lift the mower on and off the transport vehicle keeping the mower
level.
STORAGE
Proper storage is essential for keeping your lawn mower troublefree and
looking good. The following steps will help protect the mower from rust and
corrosion and make the engine easier to start when you use the lawn mower
again.
Cleaning
1. Wash the lawn mower, including the underside of the mower deck.
36
15°
E
Publicidad
